View RD5CYDT08_341406.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

RD5CYDT08
IGBT Driver / CMOS Logic Level Shifter
REJ03D0181-0400Z Rev.4.00 Jul. 12, 2004
Description
The RD5CYDT08 has two-input AND gate in a 5 pin package. This product is suited as IGBT Driver IC for the strobe.
Features
* Supplied on emboss taping for high-speed automatic mounting. * TTL compatible input level Supply voltage range : 4.0 to 6.0 V Operating temperature range: -40 to +85C * Logic-level translate function 3.0 V CMOS logic 5.0 V CMOS logic * High drive current IOH short = -130 mA (min) (@VCC = 5.0 V) * Low sink current IOL short = 40 mA (max) (@VCC = 5.0 V) * Ordering Information
Package Part Name RD5CYDT08CME Package Type CMPAK-5 pin Package Code CMPAK-5V CMPAK-5V(O) Abbreviation CM Taping Abbreviation (Quantity) E (3,000 pcs/reel)
Outline and Article Indication
* RD5CYDT08
Index band Marking
D
4
CMPAK-5
= Control code
Rev.4.00 Jul. 12, 2004 page 1 of 7
RD5CYDT08
Function Table
Inputs A L H L H H : High level L : Low level L L H H B L L L H Output Y
Pin Arrangement
IN B
1
5
VCC
IN A
2
GND
3
4
OUT Y
(Top view)
Block Diagram
A input
Y output
Internal circuit
B input
Rev.4.00 Jul. 12, 2004 page 2 of 7
RD5CYDT08
Absolute Maximum Ratings
Item Supply voltage range Input voltage range Input clamp current Output clamp current Continuous output current Continuous current through VCC or GND Maximum power dissipation *3 at Ta = 25C (in still air) Storage temperature Notes:
*1
Symbol VCC VI VO IIK IOK IO ICC or IGND PT Tstg
Ratings -0.5 to 7.0 -0.5 to VCC + 0.5 -0.5 to VCC + 0.5 20 50 -200 100 200 200 -65 to 150 V V V
Unit
Test Conditions
Output voltage range *1, 2
mA mA mA mA mW C
VI < 0 or VI > VCC VO < 0 or VO > VCC VO = 0 VO = VCC
The absolute maximum ratings are values, which must not individually be exceeded, and furthermore no two of which may be realized at the same time. 1. The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed. When Over shoot / Under shoot pulse width is under 10 ns, input and output voltage permit to -15 V or VCC+1.5 V. 2. This value is limited to 5.5 V maximum. 3. The maximum package power dissipation was calculated using a junction temperature of 150C.
Recommended Operating Conditions
Item Supply voltage range Input voltage range Output voltage range Operating free-air temperature VI VO Ta Symbol VCC 4.0 0 0 -40 Min 6.0 VCC VCC 85 Max V V V C Unit Conditions
Note: Unused or floating inputs must be held high or low.
Electrical Characteristic
Ta = -40 to 85C
Item Input voltage Output current Input current Quiescent supply current Input capacitance Symbol VIH VIL IOH short IOL short IIN ICC CIN VCC (V) 4.5 to 5.5 4.5 to 5.5 5.0 5.0 5.5 5.5 5.0 2.0 -- -100 30 -- -- -- Min -- -- -130 40 -- -- 2.5 Typ -- 0.8 -160 50 5 10 -- A A pF mA VO = 0 V VO = VCC VIN = 5.5 V or GND VIN = VCC or GND, IO = 0 VIN = VCC or GND Max Unit V Test condition
Rev.4.00 Jul. 12, 2004 page 3 of 7
RD5CYDT08
Switching Characteristics
VCC = 5.0 0.5 V
Item Propagation delay time Output rise time Output fall time Symbol td(ON) td(OFF) tr tf Ta = -40 to 85C Min Typ Max -- -- -- -- -- -- -- -- 70 140 800 1500 Unit ns Test Conditions CL = 4000 pF FROM (Input) A or B TO (Output) Y
Rev.4.00 Jul. 12, 2004 page 4 of 7
RD5CYDT08
Test Circuit
VCC
Pulse generator
Input
Output
50
CL = 4000 pF
Note: CL includes probe and jig capacitance.
* Waveforms
3V Input 1.5 V 1.5 V GND t d(ON) tr t d(OFF) tf
90% Output 10%
90%
VOH
10%
VOL
Note: Input waveform : duty cycle 50%
Rev.4.00 Jul. 12, 2004 page 5 of 7
RD5CYDT08
Application Example (Strobe circuit)
Luminescence Circuit
Trigger trance
Xenon tube
IGBT Driver IGBT
Control IC
Combination example
SYSTEM IGBT 5.0 V 3.3 V CY25BAJ -8F CY25AAJ -8F CY25BAH-8F IGBT Driver RD5CYD08 RD5CYDT08 RD3CYD08 Control IC 5.0 V signal 3.3 V signal 3.3 V signal
IGBT Driver Lineup
TYPE No. RD5CYDT08 Specification Vcc = 4.0 to 6.0V TTL level input IOH(short) = -130mA(typ) @ Vcc=5.0V IOL (short) = 40mA(typ) @ Vcc=5.0V Vcc = 4.0 to 6.0V CMOS level input IOH(short) = -130mA(typ) @ Vcc=5.0V IOL (short) = 40mA(typ) @ Vcc=5.0V Vcc = 2.0 to 3.6V CMOS level input IOH(short) = -130mA(typ) @ Vcc=3.3V IOL (short) = 45mA(typ) @ Vcc=3.3V CMPAK-5 Package
RD5CYD08
RD3CYD08
IGBT Lineup
TYPE No. CY25AAJ-8F CY25BAJ-8F CY25BAH-8F Specification VCES = 400V(max), ICP = 150A(max), 4V drive VCES = 400V(max), ICP = 150A(max), 4V drive VCES = 400V(max), ICP = 150A(max), 2.5V drive Package TSSOP-8 SOP-8
Rev.4.00 Jul. 12, 2004 page 6 of 7
RD5CYDT08
Package Dimensions
Unit: mm
(0.65)
(0.65)
(0.425)
1.3 0.2
0.15- 0.05
2.1 0.3
+ 0.1
1.25 0.1
0 - 0.1
2.0 0.2
0.9 0.1
(0.2)
(0.425)
5 - 0.2 0.05
Package Code JEDEC JEITA Mass (reference value)
CMPAK-5V -- Conforms 0.006 g
Unit: mm
(1.3)
(0.65) (0.65)
0.15 0.05
1.3 0.05*
5 - 0.2 - 0.05
+ 0.1
2.0 0.1*
+ 0.02 - 0.03
(0.1)
0.88
(2.1)
0.025 - 0.1
* The value does not include Resin Bar. (One side: 0.15 mm (max))
Package Code JEDEC JEITA Mass (reference value)
CMPAK-5V(O) -- Conforms 0.006 g
Rev.4.00 Jul. 12, 2004 page 7 of 7
Sales Strategic Planning Div.
Keep safety first in your circuit designs!
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein.
RENESAS SALES OFFICES
Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500 Fax: <1> (408) 382-7501 Renesas Technology Europe Limited. Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, United Kingdom Tel: <44> (1628) 585 100, Fax: <44> (1628) 585 900 Renesas Technology Europe GmbH Dornacher Str. 3, D-85622 Feldkirchen, Germany Tel: <49> (89) 380 70 0, Fax: <49> (89) 929 30 11 Renesas Technology Hong Kong Ltd. 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2375-6836 Renesas Technology Taiwan Co., Ltd. FL 10, #99, Fu-Hsing N. Rd., Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology (Shanghai) Co., Ltd. 26/F., Ruijin Building, No.205 Maoming Road (S), Shanghai 200020, China Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952 Renesas Technology Singapore Pte. Ltd. 1, Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001
http://www.renesas.com
(c) 2004. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon .1.0

▲Up To Search▲

Price & Availability of RD5CYDT08

	To Download RD5CYDT08 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .